| Energy selection | 2, 5,7,10, 20, 30, 50, 70, 100, 150, 200, 300, 360 J |
| Charging time | 3 hours minimum of continuous ECG Monitoring, |
| Energy accuracy | |
| Display |
7-inch LCD High resolution |
| ECG |
Lead selection: Displayed in monitor, paddles, I, II, III, AVR, AVL, AVF, V 3-lead, or 5-lead ECG cable, Heart rate: 20 – 300 BMP Smart Alarms: Beeper/voice prompts indicate shockable rhythm |
| NIBP | |
| Sweep Speed | 25 mm/sec |
| TEMP | |
| RESP | |
| SpO2 | Measurement Range: 30 – 100 %, +/-2% between 80% - 90%, others +/- 5 % Alarm range: User set high and low limit Alarm Accuracy: +/- 10% within setting values Alarm time Accuracy: less than 12 sec |
| PR | Range: 0bpm ~ 255 bpm |
| Power supply |
AC : 100 V ~ 240 V, 50 Hz / 60 Hz Vehicle voltage (option) DC ~ 12 V |
| Alarm |
Heart Rate Alarm: On/Off display on monitor, user selectable Smart Alarms: Beeper/voice prompts indicate shockable rhythm |
| AED Mode |
Auto analyze and charge x3 with programmable auto energy level selection, screen prompts, and voice prompts Ventricular fibrillation with amplitude = 200 μ Ventricular tachycardia with rates = 140 bpm QRS complex wave duration =140 ms Charge control: control on device front panel, press key on paddle. |
| Battery |
Rechargeable, Ni-MH battery, 12V Operation time: For a new, fully charged battery discharges 60 defibrillator. Or 3 hours minimum of continuous ECG Monitoring, Additional parameters affect operating time with different functions. |
| Dimensions | |
| Weight | 12 kgs |
| Optional |
✓ 7-inch LCD display
✓ Defibrillation : Manual, Synchronized and Asynchronous
✓ Synchronized Mode: Synchronize defibrillator pulse to patient’s R-wave.
✓ Printing method: High-resolution, thermal array print head
✓ Information: Heart rate, Lead/Pads, Alarm
✓ With pacemaker
2025 © All Rights Reserved by Medzer.com
