| Venous pressure | -700 ~+800 mmHg, Accuracy ± 10 mmHg |
| Arterial pressure | +800mmHg, Accuracy±10mmHg |
| Trans membrane pressure | -700 mmHg ~ +800 mmHg, Accuracy±10 mmHg |
| Blood pump |
15 ml/min ~ 340 ml/min (D 6 mm) 20 ml/min ~ 460 ml/min (D 8mm) |
| Heparin pump | 0 ml/h ~ 10 ml/h (±5 %) |
| Precision | 0.1 ml/h |
| Blood flow range | 0 ml/min ~ 700 ml/min |
| Dialysate flow range | 0 ml/min ~ ( 300/500/800 ) ml/min (Adjustable) |
| Substitution Fluid Flow | 0 ~ 25 l/h |
| Dialysate temperature | 30 ℃ ~ 41 ℃, Accuracy ± 0.1℃ |
| Conductivity | 10 ms/cm ~ 20 ms/cm Accuracy ± 0.1 ms/cm |
| Air detector | Detecting ≥ 0.02 mL/single bubble |
| Flow scope |
UF flow scope: 0 ~ 1800 ml/h (±30 ml/h ) ISO UF flow scope: 0 ~ 2000 ml/h (±30 ml/h) |
| Blood Leak detector | Detecting blood leak ≥ 0.35 ml/min (HCT 32%) |
| Hot rinse | ≥ 85℃ |
| Disinfection |
Decalcification: Rinse, citric acid Thermal disinfection:Hot water or citric acid Chemical disinfection: sodium hypochlorite or peracetic acid |
| Water supply |
Pressure range: 0 bar ~ 8 bar Temperature range: 0 ℃ ~ 35 ℃ |
| Connected load | ≤ 2000 VA |
| Power supply | AC 220 V, 50 Hz ~ 60 Hz |
| Dimension | 850 × 840 × 1660 mm |
| Weight | 140 kgs |
✓ Sodium and UF profiling
✓ Program for sequential therapy and dialysis with variational sodium
✓ KT/V calculation evaluates the sufficiency of dialysis
✓ Hemoperfusion mode reduces water consumption
✓ Provision for isolated dialysis
✓ Back-up power supply for 30 min after electricity off
2025 © All Rights Reserved by Medzer.com
