Cardiotocography Machine | Lab Equipment | Medzer

Cardiotocography Machine

Ultrasonic Fetal Monitor UFM-1000A
Ultrasonic Fetal Monitor UFM-1000A
FHR Probe: nine-unit, wide range, pulse wave, high sensitivity
Signal Strength: < 1 mw/cm2
Frequency: 1.0 MHz
Signal processing: DSP processor
Max Sound Power: 1.5 W
TOCO Pressure Range: 20 ~ 100 units
Maternal ECG Leads choices: All, I, II, III, aVF, aVR, aVL. V1--6 chest leads showed
Gains options: × 1, × 2, × 4, and × 0.5 four trenches
Frequency: 0.5 Hz - 100 Hz
Common-mode signal inhibition: More than 70 dB
Scan rate: 12.5 mm / S, 25 mm / S, 50 mm / S standard three stalls
HR: ± 5 bpm
Precision calibration signal: 1mv(peak, ± 3% accuracy)
ST Detection: measurement range (-1.0mV ~ +1.0mV)
Response time: 1s
Alarm: Sound and Light
Preset heart rate range: (Alarm over preset numerical)
Ceiling: 1-250 bpm adjustable
Threshold: 0-249 bpm adjustable
NIBP measurement Technology: Oscillometric
Mode: Manual / Automatic
Measurement units: mmHg / kPa
Measurement time: less than 45 s
Pressure Cuffs 0-250 mmHg
Inflatable cuffs: 180 mmHg (120 mmHg newborn children 70 mmHg)
Inflatable cuffs follow: original SBP: + 30 mmHg
Blood pressure measuring range: Systolic blood pressure: 60-250 mmHg Diastolic blood pressure: 40-220 mmHg Pressure on the average: 45-235 mmHg Response time: 1s
Alarm: Sound and Light
Preset range: report (Numerical exceed preset alarm)
Systolic blood pressure maximum: 1-255 mmHg adjustable
Threshold: 0-254 mmHg adjustable
Diastolic blood pressure ceiling: 1 -255 mmHg adjustable
Minimum standards: 0 -254 mmHg adjustable
View Product Catalog
Ultrasonic Fetal Monitor UFM-1000B
Ultrasonic Fetal Monitor UFM-1000B
FHR Transducer: Multi-crystals, pulsed doppler, high sensitively
Strength: ,< 5mW/cm2
Working frequency: 1.0 MHz
Signal processing: special DSP system and modern recognization
Measurement range: 50 bpm ~ 210 bpm
TOCO Pressure Range: 0 ~ 100 units
Maternal ECG Measure scope: 30 bpm ~ 240 bpm
Measure accuracy: ±2 bpm
NIBP measurement a) NIBP-SYS (6.7~32.0Kpa)(50~240mmHg)
b) NIBP-DIA (3.4~26.6Kpa)(25~200mmHg)
c) NIBP-MEAN(2.0~24.0ka(15~180mmHg)
View Product Catalog
Ultrasonic Fetal Monitor UFM-1000C
Ultrasonic Fetal Monitor UFM-1000C
FHR Transducer: Multi-crystals, pulsed doppler
Strength: < 5 mW/cm2
Working frequency: 1.0MHz
Signal processing: special DSP system and modern recognization
Measurement range: 50 bpm ~ 210 bpm
TOCO Pressure Range: 0 ~ 100 units
Maternal ECG Measure scope: 30 bpm ~ 240 bpm
Measure accuracy: ±2 bpm
NIBP measurement a) NIBP-SYS (6.7~32.0Kpa)(50~240mmHg)
b) NIBP-DIA (3.4~26.6Kpa)(25~200mmHg)
c) NIBP-MEAN(2.0~24.0ka(15~180mmHg)
Maximum Mean error : ±5mmHg
Maximum Standard deviation 8mmHg
Pulse Rate Accuracy: Maximum Mean error : ±2bpm
Measure accuracy: ±2 bpm or ±5%
View Product Catalog
Ultrasonic Fetal Monitor UFM-1000D
Ultrasonic Fetal Monitor UFM-1000D
FHR Ultrasound Frequency: 1MHz 1.5MHz 2MHz ±1KHz
Ultrasound input intensity: 1.8 mW/cm2
Range: 30 bpm ~ 240 bpm
Accuracy: ±1bpm
Alarm limit & tolerance: Max: (30 ~ 240)bpm, tolerance: ±5%.
Min: (30 ~ 240)bpm, tolerance: ±5%
TOCO Pressure Range: 0 ~ 100 units
Resolution: 1%
Zero-mode:Manul Automatic 5 10 15 20 Adjustable
Pressure tolerance: +6.7%
Maternal ECG Lead selection: I, II, III, aVR, aVL, aVF, V
Heart rate range: 10-300bpm
Accuracy: ±1bpm or ±1%
Sweep speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50mm/s
Gain selection: × 1/4, × 1/2, ×1, ×2, ×4, Auto
Calibration: ±1 mV
NIBP measurement Principle: Oscillometric method
Systolic 30-270mmHg
Diastolic 10-200mmHg

Mean 20-220mmHg
Measurement mode: Manual/Automatic/continuous measurement
Auto-measurement cycle: 0-480mins adjustable
Other function: NIBP Trend tabulation, supplementary venipuncture function
View Product Catalog
Product Category
Rehabilitation Table